DRIVING
139
The electric parking brake combines
2 operational modes:
-
Automatic application/release
Application is automatic when the
engine stops, release is automatic
on use of the accelerator (activated
by default),
-
Manual application/release
The parking brake can be applied/
released manually by pulling control
lever
A
.
ELECTRIC PARKING BRAKE
Deactivation is recommended in
particularly cold conditions (ice)
and during towing (recovery...).
Refer to the "Manual release"
paragraph.
Programming the mode
Depending on the country of registration
of the vehicle, the automatic application
when the engine is switched off and the
automatic release when you press the
accelerator can be deactivated.
If this warning lamp in the in-
strument panel comes on, the
automatic mode is deactivated.
The system can be activated/
deactivated by a PEUGEOT
dealer.
The parking brake is then applied and
released manually. When the driver's
door is opened, there is an audible beep
and a message is displayed if the brake
is not applied.
Do not place any object (packet of
cigarettes, telephone, ...) behind
the electric brake control.
Summary of Contents for 3008 HYbrif4
