PEUGEOT 3008 HYbrif4, Handbook

Page: 58 / 284

56
INSTRUMENTS and CONTROLS
Following this operation, if you
wish to disconnect the battery,
lock the vehicle and wait at
least fi ve minutes for the zero reset
to be taken into account.
Service indicator zero reset
After each service, the service indicator
must be reset to zero.
The procedure for resetting to zero is as
follows:
)
switch off the ignition,
) press and hold the trip distance
recorder zero reset button,
) switch on the ignition; the distance
recorder display begins a count-
down,
) when the display indicates "=0" ,
release the button; the spanner dis-
appears.
The distance remaining may
be weighted by the time factor,
depending on the driving condi-
tions.
Therefore, the spanner may also
come on if you have exceeded the
two year service interval.
Service overdue
For 5 seconds after the ignition is
switched on, the spanner fl ashes to
indicate that the service must be carried
out as soon as possible.
Example: the service is overdue by
300 miles (300 km).
For 5 seconds after the ignition is
switched on, the screen indicates:
5 seconds after the ignition is switched
on, the distance recorder resumes its
normal operation. The spanner re-
mains on .
Retrieving the service information
You can access the service information
at any time.
) Press the trip distance recorder zero
reset button.
The service information is displayed
for a few seconds, then disappears.