PEUGEOT 3008 HYbrif4, Handbook

Page: 189 / 284

PRACTICAL
INFORMA
TION
187
Charging the battery using a
battery charger
) Disconnect the battery from the
vehicle.
) Follow the instructions for use pro-
vided by the manufacturer of the
charger.
)
Reconnect starting with the nega-
tive terminal (-).
) Check that the terminals and con-
nectors are clean. If they are covered
with sulphate (whitish or greenish
deposit), remove them and clean
them.
Starting using another battery
) Connect the red cable to the posi-
tive terminal (+) of the fl at battery A ,
then to the positive terminal (+) of
the slave battery B .
)
Connect one end of the green or
black cable to the negative termi-
nal (-) of the slave battery B .
) Connect the other end of the green
or black cable to the earth point C
on your vehicle (engine mounting).
) Operate the starter, let the engine run.
) Wait until the engine returns to idle
and disconnect the cables.
Do not attempt to charge the
high voltage battery.