PEUGEOT 3008 HYbrif4, Handbook

Page: 50 / 284

48
INSTRUMENTS and CONTROLS
Warning lamp is on Cause Action/Observations
Diesel engine
pre-heating
fi xed.
The ignition switch is at the
2nd position (ignition on).
Wait until the warning lamp has switched off
before starting.
The duration for which the warning lamp is on is
determined by the climatic conditions.
Electric
parking brake
fi xed.
The electric parking brake is
applied.
Release the electric parking brake to switch off
the warning lamp: with your foot on the brake
pedal, pull the electric brake control.
Observe the safety recommendations.
For more information on the electric parking
brake, refer to the "Driving" section.
Deactivation
of the
automatic
functions of
the electric
parking brake
fi xed.
The "automatic application"
(on switching off the engine)
and "automatic release"
functions are deactivated or
faulty.
Activate the function (according to country) via the
vehicle con fi guration menu or contact a PEUGEOT
dealer or a quali fi ed workshop.
Foot on the
brake pedal
fi xed.
The brake pedal is not
pressed.
With the 6-speed electronic gearbox system,
press the brake pedal to start the engine
(lever in position N ).
If you wish to release the parking brake without
pressing the brake pedal, this warning lamp will
remain on.
fl ashing.
With the 6-speed electronic
gearbox system, if you hold
the vehicle on an incline
using the accelerator for too
long, the clutch overheats.
Use the brake pedal and/or the electric parking
brake.