Petzl C73JF0, Manual

Page: 6 / 32

C73000 NEWTON / C73JFO NEWTON FAST JAK C73505-F (280607)
5
How to put the harness on
EN
362
Open
the
leg
loop
buckles
and,
holding the shoulder straps, put on the harness like a vest.
5A. Fasten and adjust the leg loops.
- NEWTON: DoubleBack buckles. - NEWTON
FAST
JAK: Fasten
the F
AST buckles. Be careful
of foreign bodies which can impede the operation of the F
AST buckles (such as
pebbles, sand, clothing...). Check for correct locking. Stow the excess webbing neatly using the strap retainers
(flat
against
the
waist
belt).
5B. Adjust the shoulder straps.
Stow the excess webbing using the strap retainer on the shoulder strap.
5C. Close the harness.
AL
W
AYS connect the two
sternal rope loops
with a locking connector
.
Adjustment and suspension test Your harness must be adjusted to fit snugly to reduce the risk of injur
y in case of a fall.
You must move around and hang in the harness (suspension test) from each sternal and dorsal attachment point with your equipment to verify that the harness fits properly
, provides adequate comfort for the
intended use and that it is optimally adjusted.
DoubleBack
Fast