Page 59 of 88
User Guide
Petwalk Solutions GmbH & Co KG
10.4.2
PROGRAMMING OF EXIT TIMES
For adjusting the time, when your pet is allowed to get outside, press the
Setup
button on
your remote control. As a confirmation of being in the setup mode all the symbols on the display
are flashing green.
By pressing the
Exit Control
button you enter the setting mode of the time from when your
pet is allowed to leave the house. Using the
Up
and
Down
buttons, you can change the
hours as you like. Next to the hours currently set the green flashing symbol
Exit Control
is
shown and the green flashing symbol Time Program
are shown as in the picture below.
After setting the correct hour, confirm it with the
OK
button. The display changes to the of
the minutes setting. The minute value is set in the same way.
After reaching the desired minute value, confirm with the
OK
button and you will
automatically be lead to the programming of the end time of the exit, as indicated by the red
flashing exit control
symbol.
