PerkinElmer Raman Micro 200 Series, Getting Started Manual

Page: 70 / 114

70 . RamanMicro 200 Series Getting Started Guide
45. Click Finish.
46. Restart your PC.
This completes the installation of the Spectrum software.
If appropriate, you should now install the triggered fiber optic probe drivers, as described in
the Raman Triggered Fiber Optic Probe leaflet (L1321887) and then connect the fiber optic
cables from the triggered fiber optic probe to the RamanMicro 200, as described for a
standard fiber probe in
Attaching and Removing the Fiber Optic Probe
on page 79.
NOTE: You should not allow the PC to enter Standby mode. On the Screen Saver page of
the Display Properties dialog, click Power and then set System standby and Turn
off hard disks to Never.