PerkinElmer Raman Micro 200 Series Getting Started Manual Download Page 18

Page: 18 / 114

18 .

RamanMicro 200 Series Getting Started Guide

EMC Compliance

EC directive

The RamanMicro 200 and RamanMicro 200F have been designed and tested to meet the

requirements of the EC directive 2004/108/EC. The RamanMicro 200 Series complies with the

EMC standard EN61326 (EMC standard for electrical equipment for measurement, control

and laboratory use), and EN55011 (ISM) Class A (rf emissions).

FCC rules and regulations

This product is classified as a digital device used exclusively as industrial, commercial, or

medical test equipment. It is exempt from the technical standards specified in Part 15 of the

FCC Rules and Regulations based on Section 15.103(c).

Summary of Contents for Raman Micro 200 Series



















































































































Search results

Summary of Contents for Raman Micro 200 Series

Reviews:

Brands by name

Popular brands

PerkinElmer Raman Micro 200 Series, Getting Started Manual

Search results

Summary of Contents for Raman Micro 200 Series

Reviews:

Brands by name

Popular brands