![background image](http://html1.mh-extra.com/html/perel/cctvset10/cctvset10_user-manual_1528762013.webp)
CCTVSET10
26/05/2011
©
Velleman nv
13
7.3.5 ADVANCE
Use the advanced setup menu to configure alarm settings, motion detection, mobile surveillance, PTZ
settings and network settings. The advanced setup menu contains the following sub-menus:
Alarm
,
Info
,
MD
,
Mobile
,
System
,
PTZ
, and
Network
.
7.3.5.1 ALARM
Use the Alarm menu to configure alarm and email settings.
I/O Alarm
: each channel has one I/O alarm. When an alarm is triggered the corresponding channel
will start alarm record.
NO
(Normal Open, when alarm in, close)
OFF
(Normal Closed, when alarm in, open)
HDD LOSS
: The alarm will sound if the internal HDD is damaged. The live screen will show
[H]
.
HDD SPACE
: when the space less then 500MB, the live screen will show ‘
not enough space
’. Clear
data or replace HDD.
VIDEO LOSS
: when a camera is disconnected, the live screen will show ‘
video loss
’.
ALARM MANAGE:
•
alarm output: set the time of alarm output: 0, 10, 20, 40 or 60 seconds.
•
Buzz: set the time of buzz: 0, 10, 20, 40 or 60 seconds.
•
post record: set the record time after alarm: 30 Sec, 1, 2 or 5 Min.
EMAIL SETUP:
The system can send an email notification with a JPEG snapshot for triggered events on the system
every 3 minutes.
To setup email notification:
1)
Under EMAIL, select
ON.
2)
Under SSL, select
OFF
.
NOTE:
SSL deals with encryption. Only advanced users should enable this option.