PERCo TTR-04CW, Assembly And Operation Manual

Page: 9 / 34

Assembly and Operation Manual
Figure 3. LED indication display
5.2.3 The RC panel/ WRC/ ACS controller (10) and the turnstile power supply unit (8) are
connected to the CLB with the cables (9 and 11) in accordance with the connection layout
(see Fig. 6).
5.2.4 The RC panel is designed as a small desktop device with a shockproof ABS plastic
case and is intended for setting and indicating operating modes when the turnstile is
operated manually. The RC panel is connected to the CLB with a multicore cable (11) via
the
XT1.L connector block (See Fig. 4).
Figure 4. RC panel overall view
1, 2, 3 – buttons
LEFT
,
RIGHT
,
STOP
for setting the passage mode;
4, 5 – green indicators «Left» , «Right» ;
6 – red indicator «Stop», 7 – RC cable.
There are three control buttons on the RC front panel intended for setting the turnstile
operating modes. The LED indicators are located above the buttons.
The middle button on the RC panel (hereinafter — the
STOP
button) is intended to set
the turnstile to the “Always locked” mode. The left and the right buttons are intended
to unlock the turnstile for passage in the chosen direction.
8