CL-05.2 Web-interface
2. If necessary, use the dropdown list in the heading of the
“Number”
column, select the
format to display the cards identifiers.
Note:
The display format is not the format of reading of the card identifiers (set in the
“Configuration”
section, Clause 4.2.4), when you change the display format, the
format of reading does not change.
3. To save the cards to a file, click the
“Save file”
button. The cards will be saved in the
file
cards.bin
, which can be used as a backup card list.
4. To remove all the cards from the controller memory, click the
“Clear log”
button.
5. To change the Settings, select one of the cards in the working area of the page. The
window of the identifier of the selected card opens:
6. If necessary, in the opened window on the
“Essential”
tab change the card Settings.
7. Go to the
“Access rights”
tab. It is possible to set access rights for this card. To do
this, select the number of the set using the drop-down list
“Card
rights
number:”
and
configure the Settings:
35
Summary of Contents for CL-05.2
