PERCo CL-05.2, Operation Manual

Page: 33 / 42

User Manual
2. To add the new response, click the “Add” button, to change the Settings of internal
response or delete it, click in the working area of the page on the line with the
response name. The window
“Internal response (number)” will be opened:
3. In the opened window make the necessary changes of the Settings:

Selector “Number:” sets the number of response (from 1 to 40).

Selector “Source type:” specifies the launch condition of the controller response.

Selector “Source number:” ( “Receiver number:” ) and “Source direction:”
( “Receiver direction:” ) determine numbers and directions of corresponding
resources of the controller which are sources (receivers) of the response.

Selector “Receiver type:” specifies the controller response under condition of the
responses launch.

Selector “Response time:” and “Response characteristics:” set corresponding
Settings of the response.
4. Click the “Save” button. The window “Internal response (number)” will be closed,
the changed Settings will be passed to the controller.
5. To remove the response from the list, click the “Delete” button. The window “Internal
response (number)” will be closed, the internal response will be deleted.
6. To exit the window Internal response (number) without saving changes, click the
“Cancel” button. Also, it is possible to close the window using the “Close” button .
5. CONTROL OF OPERATING DEVICE
To control the operating device and change the operation mode in the direction with
associated reader, make following:
1. Click in the Web-interface menu:
“Operating device control” .
32