Iss
u
e d
a
te
: 21
.1
0.2
011
52
Subject to reasonable modifications due to technical advances.
© Fuchs, Printed in Germany
Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
Internet http://www.pepperl-fuchs.com
AS-i Safety Monitor for 2 AS-i circuits
Function and startup of the Safety Monitor
8.8.2.6
Operating the chip card from the menu
The data on the chip card can, as described in section SAFE CHIPCARD, be ex-
changed between the Monitor and the chip card. Note however the following:
In order to store a configuration on the chip card as a master configuration (i.e.
without code sequences), proceed as follows:
•
Write the released configuration into the Monitor without code sequences.
•
Copy the configuration into a memory bank using the menu.
For additional information, see section CARD –>MONITOR (copy card data to the
Monitor).
To convert a master configuration on the memory card to a Complete Configurati-
on, this configuration must be overwritten by a Complete Configuration.
This is done as follows:
•
Copy the card data to the Monitor.
•
Teach the code sequences
•
Write the data from the Monitor to the card.
8.8.3
Working with multiple memory banks
The chip card has four memory banks, each of which may contain a configuration
(Complete or Master configuration). One of the banks is the active bank.
The AS-i Safety Monitor for 2 AS-i circuits always independently utilizes the acti-
ve bank. Menu commands can however be used to copy the other memory banks
to the AS-i Safety Monitor.
The corresponding memory bank thereby becomes the active bank.
If configurations from another memory bank are copied, a few safety rules need
to be followed:
Summary of Contents for VAS-2A1L-K31
Page 107: ...VAS 2A1L K31 VAS 4A16L K31...
