Subject to reasonable modifications due to technical advances.
© Fuchs, Printed in Germany
49
Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
Internet http://www.pepperl-fuchs.com
Iss
u
e d
a
te
: 21
.1
0.2
011
AS-Interface
Function and startup of the Safety Monitor
8.8.1.3
Card empty
The following message is displayed for an empty card:
From this time on all changes are made both in the device and on the chip card.
8.8.1.4
Data compatible
When starting with an empty device (e.g. after a factory reset) a non-empty card
is found whose data are compatible with the device, the following message is dis-
played:
The card configuration is written to the device. From this time on all changes are
made both in the device and on the chip card.
8.8.1.5
Data in the device and on the chip card identical
If the card and device are not empty at start and the data are identical, no mes-
sage is displayed.
8.8.1.6
Data in the device and on the chip card not identical
If the card and device are not empty at start and the data are not identical, an er-
ror message is displayed and the card is not synchronized with the device. The
following menu is then automatically opened:
CHIPCARD FOUND
AS-I DATA WILL
BE SYNCHRONIZED
AS-I DATA FROM
CHIPCARD TAKEN
CHIPCARD AND
AS-I DATA
DIFFERENT
CARD->MONITOR
MONITOR->CARD
CONTINUE
Command
Description
CHIP CARD>MONITOR
Chip card data are copied to the Monitor
Summary of Contents for VAS-2A1L-K31
Page 107: ...VAS 2A1L K31 VAS 4A16L K31...
