Introduction
2
0
1
8
-0
4
7
1.5
General Safety Instructions
Responsibility for planning, assembly, commissioning, operation, maintenance, and
dismounting lies with the plant operator.
Installation and commissioning of all devices may only be performed by trained and qualified
personnel.
User modification and or repair are dangerous and will void the warranty and exclude the
manufacturer from any liability. If serious faults occur, stop using the device. Secure the device
against inadvertent operation. In the event of repairs, return the device to your local
Fuchs representative or sales office.
1.6
Declaration of conformity
This product was developed and manufactured under observance of the applicable European
standards and guidelines.
The product manufacturer, Fuchs GmbH, D-68307 Mannheim, has a certified quality
assurance system that conforms to ISO 9001.
Note!
Disposal
Electronic waste is hazardous waste. When disposing of the equipment, observe the current
statutory requirements in the respective country of use, as well as local regulations.
Note!
A Declaration of Conformity can be requested from the manufacturer.
ISO
9001
