
Product Description
2
0
1
8
-0
4
11
Display behavior can be activated via IO-Link
Note!
The display behavior described below are deactivated on delivery as standard, as they are only
useful in some application scenarios. You can activate and deactivate these via the IO-Link
parameterization.
LED
Color
Description
Status
Red
Permanent additional information on the detection of the
damping element for all product variants.
■
On = no damping element is detected in the detection
range (max. measuring range)
■
Off = a damping element is detected in the detection
range (max. measuring range)
Activation via parameter "0x78, subindex 1 = no damping
element detected (warning)" to value "1" or via the
Parameter
menu, "Event configuration" section, "No
Damping Element detected (Warning)" function set to
"Enabled."
S1 ... S3 and
status
Yellow, green
Localization function
■
LEDs S1 ... S3 flashing simultaneously in yellow and
the LED status in green.
To easily detect the sensor installed in a machine or plant,
conspicuous LED flashing behavior can be activated and
deactivated again via IO-Link for the sensor search. After
isolating the sensor from the supply voltage, the flashing
behavior is deactivated again as standard.
Activation via parameter "0x7f = Locator Indication" to value
1 or via the
Diagnosis
menu, "Service function" function,
indication setting set to "Locator Indication."