Pepperl+Fuchs OIT F113-B12-CB Series Manual Download Page 38

Page: 38 / 80

9165

201

OIT***-F113-B12-CB*

OITControl

The tool bar is displayed under the menu bar. All tool bar commands can also be

activated from the menu bar.

The current registered user name and the ID of the computer connected to the

OIT system are displayed on the right side of the tool bar. If there is no connection

to the OIT system, you will see the message: Offline mode / No OIT system

connected.
Most of the start screen is taken up by the display area. The display area is

divided into two areas: an overview on the left side and individual tabs on the right

side provide all necessary information on the OIT system in a clearly structured

way.

■

Left display area

: with the OIT default configuration, the left display area

provides a visualization of the communication between the PLC and the

OIT system. The current PLC and OIT system control bits are transmitted

from the OIT system to OITControl and arranged and displayed there as

individual information blocks. The following information is displayed in the

default configuration:

•

Read cycle OIT

, including the individual control bits: Request

reset, read error, ID read

•

Read cycle PLC

, including the individual control bits: Reset, read

start, current data, no data

•

OIT LED status

, including the status LEDs: Power, ready, check

alignment, trigger, error, code OK

•

OIT status information

, including the status LEDs: Wait for

trigger, SPS connection

Button

Description

Connect to the OIT system (camera)

Alternatively: Select

File > Connect to OIT

or use the shortcut

Ctrl+Q

Disconnect from OIT system

Alternatively: Select

File > Disconnect

or use the shortcut

Alt+Q

Manual entry of ID/UID number(s)

Alternatively: Select

Process > Manual entry

This function is only available if a failed read occurs.

Repeat read operation

Alternatively: Select

Edit > Repeat read

This function is only available if a failed read occurs.

Display current camera image

Alternatively: Select

Process > Camera image

Summary of Contents for OIT F113-B12-CB Series

















































































Search results

Summary of Contents for OIT F113-B12-CB Series

Reviews:

Pepperl+Fuchs OIT F113-B12-CB Series, Manual, Page: 38 / 80

Search results

Summary of Contents for OIT F113-B12-CB Series

Reviews: