manualshive.com logo in svg

Pepperl+Fuchs OIT F113-B12-CB Series, Manual, Page: 35 / 80

Share
Download
Pepperl+Fuchs OIT F113-B12-CB Series Manual Download Page 35

OIT***-F113-B12-CB*

Communicating with the OIT system

19

9165

 201

3-

06

35

7.5

TCP/IP communication through FTP

The OIT system includes an FTP server that can be accessed over a normal FTP 

connection. The following files are are stored in the device:

■

OIT_FW:

 text file that contains the series number of the firmware.

■

OIT_OS:

 text file that contains the series number of the operating system.

■

OIT_SN:

 text file that contains the series number of the device.

■

log_0:

 text file in which all log data is stored. As soon as the file becomes 

too large, another log file with a higher number is created.

■

errimg_0000000001:

program file that stores the fault patterns. If there are 

more fault patterns, they are filed under an ascending number.

■

oitdat:

 files all set parameters as a binary file.

A password is necessary to establish an FTP connection to the OIT system. No 

data can be stored in the OIT system.

File format .pgm

The file format .pgm (portable gray map image) is an uncompressed gray-scale 

file. The color depth amounts to 8 bit and contains 256 gray scales (binary). The 

format is not compressed.

Summary of Contents for OIT F113-B12-CB Series

















































































Reviews:

No comments