Pepperl+Fuchs KFD Series Manual Download

Page: 59 / 92

HART Multiplexer System KFD*-HM*-16

Configuration

201

8-04

In the table below, the data read out from the field device and the data contained in

the selected DTM is compared. This allows a comparison between the field device data

and the DTM:

Figure 6.18

Confirm your selection by clicking

Next

to complete the HART scan. The HART topology

determined in the HART scan can then be added to the device tree in the project window.

You will be prompted to save the project to store the modified HART topology.

Note!

Some manufacturers have different DTMs for the same device family. In this case, you have

to select the correct DTM from the dropdown list.

Note!

Some DTMS do not make this information available, meaning that automatic assignment

is not possible.

Summary of Contents for KFD Series





























































































Search results

Summary of Contents for KFD Series

Reviews:

Related manuals for KFD Series

Brands by name

Popular brands

Pepperl+Fuchs KFD Series, Manual

Search results

Summary of Contents for KFD Series

Reviews:

Related manuals for KFD Series

Brands by name

Popular brands