Pepperl+Fuchs KFD Series Manual Download Page 25

Page: 25 / 92

HART Multiplexer System KFD*-HM*-16

Mounting and Installation

201

8-04

4.5.2

Connection between Multiplexer Master and Multiplexer Slaves

The multiplexer slaves are connected to the multiplexer master via the 14-pin ribbon cable.

Connecting Multiplexer Master and Multiplexer Slaves

Connect the multiplexer master and the multiplexer slaves via the 14-pin ribbon cable

K-HM14.

Figure 4.9

4.5.3

Connecting the Multiplexer Devices to the Termination Board

The device is connected to the termination board via a 26-pin ribbon cable. The device has a

26-pin IDC socket on the front of the device for this purpose. 16 cables are intended for

the HART signal of the analog measuring circuits of the field devices. The remaining 10 cables

are connected to ground. For the assignment of the IDC socket, see chapter 9.2.

Fuchs provides special termination boards. Various connection options are available

for these termination boards.

Connecting Multiplexer Devices, Field Devices, and the Termination Board

Connect the multiplexer device to the termination board via the 26-pin ribbon cable K-HM26.

See chapter 3.4.

14-pin ribbon cable

DIN mounting rail

KFD0-HMM-16

KFD0-HMS-16

Danger!

Explosion hazard from exposed conductors

Exposed conductors of inadequately attached cables can cause sparks that can ignite

the surrounding potentially explosive atmosphere.

When installing the device ensure that the cables are adequately attached.

Summary of Contents for KFD Series





























































































Search results

Summary of Contents for KFD Series

Reviews:

Related manuals for KFD Series

Brands by name

Popular brands

Pepperl+Fuchs KFD Series, Manual

Search results

Summary of Contents for KFD Series

Reviews:

Related manuals for KFD Series

Brands by name

Popular brands