Multiplexer
A8
Accessory for the KLIPPEL ANALYZER SYSTEM (Document Revision 1.8)
FEATURES
•
8 channels <> 2 busses
•
BNC version for microphones
•
XLR version for line level signals
•
SPEAKON version for high power
•
15 A max. switch current
•
IEPE microphone supply
•
Multiple routing options
•
Control by USB & Parallel Port
•
Klippel-GPIO for Production Analyzer
and KA3
•
dB-Lab templates available
BENEFITS
•
Applicable in R&D and end-of-
line testing (QC)
•
Required for testing of multi-
channel systems
•
Simplifies cabling and routing
•
Intuitive manual control
•
Easy integration in automatic
tests
The KLIPPEL Multiplexer is a very flexible signal switching hardware with up to 8 channels. Different
routing modes are available to use the Multiplexer for selecting one or more input channels from 8
resources or distribute one or two sources to up to 8 receivers. Different hardware versions with
different connectors and electrical parameters are available. Different control ports offer the flexible
usage in a lot of applications. The Multiplexer can be controlled manually and by software. The Mul-
tiplexer can directly be controlled by Klippel hard / software in the QC framework. For R&D and all
other applications the routing can be controlled with a Klippel provided USB or parallel port interface
software. This software can also be controlled from the command line for automated applications.
Article Numbers:
2800-101
2800-102
2800-103
2800-104
MUX81-42-BNC (MIC version)
MUX81-42-XLR-IN (LINE-IN version)
MUX81-42-XLR-OUT (LINE-OUT version)
MUX81-42-SPEAKON (SPEAKER version)
