Pepperl+Fuchs K23-SSI/Rx/IU-C, Manual

Page: 57 / 84

| O
PERATING
S
OFTWARE
OS6.0 / OS10.0
57
Value Designation Function
11 RESET MIN/MAX Resets the minimum/maximum value (d)
(s)
12 LOCK RELEASE Releases the self-locking of all outputs (d)
13 SERIAL PRINT Sends the serial data (see "Serial Print"
parameter)
(d)
14 ACTIVATE DATA N.A.
15 STORE DATA N.A.
16 TESTPROGRAM N.A.
17 CLEAR LOOP
TIME
Resets the maximum loop time (d)
18 RESET/SET
COUNTER A
Resets/sets the counter value of channel A
to the set values in SET VALUE A—only in
"COUNTER" mode
(d)
(s)
19 RESET/SET
COUNTER B
Resets/sets the counter value of channel B
to the set value in SET VALUE B—only in
"COUNTER" mode
(d)
(s)
20 LOCK COUNTER
A
Counter (channel a) is disabled and does
not count any further pulses as long as this
command is present. —only in
"COUNTER" mode
(s)
21 LOCK COUNTER
B
Counter (channel B) is disabled and does
not count any further pulses as long as this
command is present. —only in
"COUNTER" mode
(s)
22 ZERO POSITION Transfers the current SSI position to the
"SSI Zero" parameter (rotary encoder zero
point shift)—only in "SSI" mode
(d)
(s)
23 FACTORY
SETTINGS
The device is reset to its factory settings. (d)
PUT 1 CONFIG
This parameter determines the switching characteristics for "Ctrl. In 1."
Value Designation Function
0 ACTIVE LOW Activates at "LOW" (static)
1 ACTIVE HIGH Activates at "HIGH" (static)
2 RISING EDGE Activates at rising edge (dynamic)
3 FALLING EDGE Activates at falling edge (dynamic)