Pepperl+Fuchs K23-SSI/Rx/IU-C, Manual

Page: 35 / 84

| O
PERATING
S
OFTWARE
OS6.0 / OS10.0
35
SSI OFFSET
In the case of a "RESET/SET VALUE" command (via control input or PC user
interface), the as yet unscaled position value currently being recorded (after bit
suppression and any rotary encoder zero point shift) is transferred to the "SSI
OFFSET" parameter and the measurement result is reset to zero. From the new
zero point, it is now possible to move in the positive and negative directions,
depending on the direction of rotation.
(Display zero point shift)
Value Function
0 Smallest value
…
999999999 Largest value
ROUND LOOP VALUE
Defines the number of rotary encoder steps if a concentricity function is desired.
Value Function
0 No concentricity
…
99999999 Number of steps for the concentricity function
SAMPLING TIME (S)
Determines the read-in cycle for the SSI signal in the managing operation
Value Function
0.001 Minimum measuring time in seconds
0.010 Default value
9.999 Maximum measuring time in seconds