Pepperl+Fuchs F2D0-TI-Ex8.FF Series, Manual, Page: 36 / 48

2
017-
05
36
Temperature Multi-Input Device
Function Block Descriptions
7 Function Block Descriptions
7.1 Resource Block (RB)
Rel.
Index
Parameter Description
01 ST_REV The revision level of the static data associated with the
resource block. The revision value is incremented each
time a static parameter value in the block is changed.
02 TAG_DESC The user description of the intended application of the
block.
03
STRATEGY The strategy field can be used to identify grouping of
blocks. This data is not checked or processed by the
block.
04
ALERT_KEY The identification number of the plant unit. This
information may be used in the host for sorting alarms,
etc.
05
MODE_BLK The actual, target, permitted, and normal modes of the
block:
·
■
Target: The mode to "go to"
■
Actual: The mode the "block is currently in"
■
Permitted: Allowed modes that target may take on
■
Normal: Most common mode for actual
06
BLOCK_ERR This parameter reflects the error status associated with
the hardware or software components associated with a
block. It is a bit string so that multiple errors may be
shown. Supported values are:
·
■
Simulate Active: Hardware switch is set to "simulation
possible"
■
Lost Static Data: The database used for storing the
NV parameters within the device is corrupt
■
Device Needs Maintenance Now: The hardware of
the device failed in some way (e.g., body temperature
too high)
■
Out-of-Service: The RB is in OOS mode
07
RS_STATE State of the resource block application state machine.
08 TEST_RW Read/write test parameter. Used only for conformance
testing.
09
DD_RESOURCE String identifying the tag of the resource that contains the
device description for this resource.
10 MANUFAC_ID Manufacturer identification number. Used by an interface
device to locate the DD file for the resource.

The Fuchs ID is 0x502B46.
11
DEV_TYPE Manufacturer model number associated with the
resource. Used by interface devices to locate the DD file
for the resource. 
The P+F TI Mux is device type 3.
12
DEV_REV Manufacturer revision number associated with the
resource. Used by an interface device to locate the
DD file for the resource.
13 DD_REV Revision of the DD associated with the resource - used by
an interface device to locate the DD file for the resource.
14 GRANT_DENY Options for controlling access of host computers and
local control panels to operating, tuning, and alarm
parameters of the block.
15
HARD_TYPES The types of hardware available as channel numbers.
Only scalar types are supported.