CP302
PMC and CompactPCI Expansion Module
ID 21112, Rev. 05
Page B - 3
©
PEP Modular Computers GmbH
B. PMC and CompactPCI Expansion Module
B.1 Overview
The PEP CP302 PMC module has been designed to provide the CP302 user with an
effective gateway to the world of PMC modules and to the expanded capability made
possible by the additional CompactPCI interface.
PMC modules are renowned for their flexibility and versatility of use. They afford the
user wide ranging system-independent solutions by means of easily interchanged or
upgraded mezzanine add-on modules. The PEP CP302 PMC module has been
designed to maximize the advantages provided by PMC modules in a 3U environment.
The CP302 PMC module is available as two variants; one is a 3U non-intelligent,
passive carrier board with one PMC slot and the other features a bridge to an additional
CompactPCI interface.
B.2 Technical Specifications
Table B-1: CP302 PMC Module Specifications
CP302 PMC Module
Specifications
PCI-Standard
32-bit / 33 MHz PCI Bus on the PMC side
compliant with PCI 2.1
PMC Signaling Voltage
PMC side: 3.3V or 5V signaling, depending on
baseboard configuration
PMC connectors
PMC Jn1 and Jn2 connectors
Mechanical Compliance
IEEE 1101.10
CMC IEEE P1386/Draft 2.0 (with minor
exceptions)
CompactPCI Bus Interface (optional)
Compatible with CompactPCI Specification V
2.0, Rev. 3.0
32-bit/33 MHz master interface 3.3V/5.0V
compatible
Temperature Range
Operating temperatures:
Standard: 0°C to +60°C
-25°C to +75°C (optional) E1
-40°C to +85°C (optional) E2
Storage: -55°C to +85°C
Board Dimensions
Single-height Eurocard:
100 mm x 160 mm
1 x 4 HP slot
Board Weight
110 grams
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
