27830 -8/40-
Pink (B118)
Black (0-S250)
Red (0-S250)
Green (B116)
Motor
Screws
IC
IC
DT(3x7)
DT(5x10)
DT(3x7)
T94
7) Peel off T94, and then pull out flexible board.
Unsolder 3 lead wires (0-J201, 0-Q200).
Fig.32
8) Remove 0-T100 from DT (3 places) as shown in Fig.32.
9) Lift up 0-T100, and then unsolder 4 lead wires (0-S250, B116, B118).
Fig.33
Fig.34
2-9. Upper Right Side (2)
1
）
3 lands on T64.
2
）
Disconnect the flexible board of 0-O100 from connector
terminal.
Fig.35
Pink (0-Q200)
(0-J201)
White
Shielding wire
[Note of Assembly] Bottom of body
Arrange the lead wires securely with care that
0-T100 is not projected from the Main body as
shown in Fig.34.
