27830 -22/40-
A334
0-T57
TY-CNL-D
1.7x4.0
TY-CNL-D1.7x3.5
G151
TY-CNL-D
1.4x4.0
A326
TY-CNL-D1.4x4.0
A333
A331
BOφ1.5
G134
G134
BO
φ
1.5
G134
TY-CNL-D1.4x2.5
A355
SL
A354
A357
6-6. A334 (0-T57)
1) Apply G151 to land of T57.
2) TY-CNL-D1.7x3.5
、
…x4.0
Fig.116
6-7. 0-A332
1) Apply G134 to clicking part of A335.
2) Pass the flexible board through the hole of A335 (Mode dial) and A334 as shown in the
figures below, and then install 0-A332.
3) TY-CNL-D1.4x4.0 (from inside cover)
Fig.117
Fig.118
6-8. A331
1) BO
φ
1.5 (Apply G134)
2) A333 (Rounded corner to be installed bottom side as shown in Fig.120.), TY-CNL-D1.4x4.0
3) A331, A326 (screw)
Fig.119
Fig.120
[CONF.] Make sure that the mode dial and mode lever rotate smoothly with clicking.
6-9. A351 (Assy.)
1) Apply G134 to A301 (3 places).
2) A351 (Main SW lever)
3) Hook A357 (Main SW spring)
Fig.121
Fig.122
4) BO
φ
1.5 (Apply G134)
5) A355, TY-CNL-D1.4x2.5
6) A354, TY-CNL-D1.4x2.5
7) Apply screw-lock agent to screw (2 places).
8) [CONF.] Confirm the operation of A351.
Fig.123
A335
G134
0-A332
