27830 -40/40-
[Procedure of making] Adhere LX newer 1
st
shutter curtain at the position of aperture
on A221 and cut it 31mm as shown in the figure below.
1 20
19 3
31
16
10
24
φ7〜8 (x3)
[Procedure of making] Solder the power codes for the regulated DC power supply to the
battery contacts (Y22, Y23) of BG-20. Unsolder a black lead wire (SW-GRIP).
JIGS, TOOLS AND TESTERS
Order No.
Exclusive use for 27830
1. Programmed software for 27830 SLR soft for PC/AT (SF) No.95901-P276
2. 1
st
Mirror angle (47.5°) adjusting jig for 27830
-J136
3. Mirror angle adjusting jig for 27830
-J137
4. AF positioning jig (Square) for 27830
-M521
5. 2m AF chart for 27830 (2 types: Vertical and Horizontal)
6. DC power adaptor for 27830 (Hand made jig / Use the BG-20)
7. Temporary bottom cover (Hand made: Refer to the following figure. The mount lock button
should be assembled.)
8. TTL adjusting plate (Hand made / Use 26900-A221 (pressure plate cover))
Others (1)
1. AF positioning jig (Cross) for 27250
No.95901-M514
2. I/F buffer cable for 27250
-M515
3. Cable switch CS-205 (For release checking when removing cosmetic parts.)
Others (2) [Common in use for other 35mm AF SLR]
1. Personal computer (PC/AT)
2. Color display
3.
①
Serial interface (SIFI-269) and Interface buffer (IFB-269)
②
Camera multi adapter A
-M127
I/F
buffer
cable
for
27250
-M515
③
Camera multi adapter II
-X100
I/F
buffer
cable
for
27250
-X003
4. Hexagonal driver 1.5mm (HD-M1.5)
-K072
5. Shutter tester (measurable 1/4000ms)
6. Collimator chart with 3 lines (OCRC-259, for AF checking)
-M021
7.
AE
master
lens
(ML-245)
-N028
8. Diaphragm set ring F8 (KA-0-1A)
-N026
9. Focus master lens for 35mm (KML-01)
-N017
10. AE master lens for LX (LML-240)
-N027
11. Dial gauge comparator (PH-2)
-N001
12. Block gauge for 35mm (229N-A01-A2)
-N004
13. Mount block (1620-A) (substitution of 23600N-A01 Mount block/ spacer)
-N047
14. Mount block spacer (23600N-A01,A104-A-A)
15. Mount spacer holder (23600N-A01,A104-A-B)
-N007
16. 1000mm Collimator
17.
Mirror
positioning
scope
-N049
18. Focus master lens for 2m(ML-259)
-N024
19. Pen light (or similar one/ for adjusting position of light receiving sensor)
20. Regulated DC power supply (capable current at least 3A)
21. Circuit tester
CUT
31mm
