27830 -14/40-
TY-CNL-D 1.7x4.0
0-J201
M19
SI-prism
A105
A104
A119
A143
A145
A145
A146
A147
A148
A118
T301
0-A126
0-A108
A110
TY-CNL-D 1.7x3.0
(C.6172300)
TY-CNL-F 1.4x3.5
(C.6191351)
DT(3x7)
W98(t=adj)
DT(3x7)
DT(3x7)
TY-CNL-F 1.4x2.5
(C.6171251)
TY-CNL-D 1.7x3.5
(C.6172351)
TY-CNL-D 1.7x2.8
(C.6172281)
TY-CNL-D 1.4x2.5
(C.6171251)
TY-CNL-G 1.7x2.5
(C.6202251)
I331
I332
T65
B58
B59
B63
B62
B57
M4
M21
B41
M23
M120
B65
0-B52
B66
M10
Silicone
TY-CNL-D
1.7x3.5
0-L101
M9
M7
M3
T94
4-7. 0-O170
1
）
TY-CNL-F1.7x4.0 (x2)
2
）
M14, 0-O170 (Remove adhesive)
4-8. 0-L101
Fig.70
1
）
Remove M7 upward.
2
）
Peel off M19 (SI black mat tape) and other light seal tapes.
[CAUTION] Carefully peel off M19, because the
SI prism is adhered behind M19.
3
）
T94, TY-CNL-D1.7x3.5 (x2), M9
4
）
Remove the silicone (2 places).
5
）
Remove 0-L101 gently, using care that
SI prism is not touched to the Front housing assy.
6
）
M3
Fig.71
4-9. 0-J201
TY-CNL-D1.7x4.0
4-10. 0-B52 and Related Parts
Fig.73 Fig.72
For disassembly, refer to Fig.74.
4-11. A104 and Related Parts
For disassembly, refer to Fig.74.
Fig.74
TY-CNL-F
1.7
×
4.0
0-O170
M14
Super-X
Loctite
[Note of Assembly]
Temporarily installation and position
adjustment are required.
[Note of Assembly]
Apply silicone to the place as shown in Fig.71, and
leave them until they become hard.
Stick M19 on 0-A101 as shown in Fig.72, using care
that do not apply a stress to the SI prism.
[Note of Assembly]
Temporarily installation of 0-B52 and the position
adjustment of 1
st
and 2
nd
mirror are required.
[Note of Assembly]
Five W98 (t=0.2) are fixed by a
small amount of Super- X (Black).
