Pentax 750Z - Optio Digital Camera Operating Manual Download Page 89

Page: 89 / 200

Tak

ing Pi

cture

Flash Modes

Selecting the Flash Mode

(No

icon)

Auto

The flash discharges automatically depending on the

light conditions. You can select the Rear-curtain flash.

Flash Off

The flash will not discharge, regardless of the

brightness. Use this mode to take pictures at dusk or

in locations where flash photography is prohibited

(e.g., museums).

Flash On

The flash discharges regardless of the brightness.

You can select the Rear-curtain flash.

Auto +

Red-eye reduction

This mode reduces the phenomenon of red eyes

caused by the light from the flash being reflected in the

subject’s eyes. The flash discharges automatically.

Flash On +

Red-eye reduction

This mode reduces the phenomenon of red eyes

caused by the light from the flash being reflected in

the subject’s eyes. The flash will discharge

regardless of the light conditions.

R. Curtain

The flash is set to Rear-curtain flash. (Usually the

flash discharges right after the shutter release

button is pressed.)

With Rear-curtain flash, the flash discharges right

before the exposure ends. You can take pictures

with different atmosphere when taking with a slow

shutter speed. Rear-curtain flash can only be set

when in Auto or

flash mode.

• The flash will not discharge (Flash Off) when in the

mode, when

is selected in

mode, when the drive mode is set to

or when the focus mode is set to

• A pre-flash discharges when using the red-eye reduction function.
• You cannot select Auto or

mode.

Summary of Contents for 750Z - Optio Digital Camera









































































































































































































Search results

Summary of Contents for 750Z - Optio Digital Camera

Reviews:

Related manuals for 750Z - Optio Digital Camera

Brands by name

Popular brands

Pentax 750Z - Optio Digital Camera, Operating Manual

Search results

Summary of Contents for 750Z - Optio Digital Camera

Reviews:

Related manuals for 750Z - Optio Digital Camera

Brands by name

Popular brands