background image

Pentair International S.a.r.l
Avenue de Sévelin 18
1004 Lausanne - Switzerland

Authorised person for technical documentation

Guillaume Goussé

Lausanne, 01/04/2019

European Vice President of Operations 

SAFETY  EN 61010-1:2010

EM 

EN 61326-1: EN 301 489-3

EMF 

EN 62311

RADIO 

EN 300 220-2

SPEEDEO (+ PARTS)

SB-PF-SPO-003C

PART NUMBERS:

SB-SE-TEC-006A

Pentair thanks you for placing your trust in the company and purchasing a SPEEDEO®, the variable speed pump control automaton, with 3 
assignable pieces of equipment. SPEEDEO® will start up the correct speed of the connected variable speed pump according to the hydraulic 
requirements linked to the event.

Please carefully read this user manual to fully benefit from all of the functions of SPEEDEO®. Store it carefully so that it can be consulted at any 

time.

Product specifications: 

SB-PF-SPO-003C model

Operating temperature:

 0° to 40° C   

Operating hygrometry:

 40% at 75° C   

Power supply:

 230 V ~, 50 Hz

Maximum operating altitude:

 2000 m   

Weight (excluding probes):

 1.2 kg 

 

Main box (internal use):

 IP 64

Customer Support: PISA, ITALY (8:30 A.M. to 4:30 P.M.) CET  

 

 

website: www.pentairpooleurope.com

- Warranty (excluding probes and consumables): 2 years 

© 2019 Pentair International LLC, All rights reserved   

- The document is subject to change without notice

Trademarks  and  disclaimers:  Speedeo®,  Soleo®  and  Pentair®  are  trademarks  and/or  registered  trademarks  of  Pentair  and/or  its  affiliated 
companies. Unless indicated otherwise, names and brands of others that may be used in this document are not used to indicate an affiliation or 

endorsement between the owners of these names and brands and Pentair. Those names and brands may be the trademarks or the registered 
trademarks of these parties, or others.

Waste treatment of electronic devices at the end of their service life:

The crossed-out bin placed on the main parts which make up the product indicates that it must not be disposed of with household 
waste. It must be returned to an appropriate collection point for electronic device recycling (information available from the local 
household waste collection service). This product contains potentially dangerous substances which may have adverse effects on the 
environment and human health.

 

 

Declaration of conformity

Directives – Harmonised standards

Pentair International Sarl - Avenue de Sévelin 18 - 1004 Lausanne - Switzerland

We declare, under our own responsibility, that the product meets the directives

Other normative documents

Summary of Contents for SPEEDEO SB-PF-SPO-003C

































Reviews: