GENERAL POINTS
- DANGER
- INSTALLERS, POOL SPECIALISTS AND OWNERS MUST CAREFULLY READ THESE WARNINGS AND ALL
INSTRUCTIONS BEFORE USING THIS PRODUCT.
- WARNING
- Most countries regulate the construction, installation and operation of public swimming pools and spas, and the construction of
residential pools and spas. It is important to comply with these regulations, many of which directly regulate the installation and use of this product.
Consult your local building and health codes for more information.
- ATTENTION
- This installation and user guide contains important information on the installation, operation and safety of this product. This guide
should be provided to the owner and/or user of this product.
INSTALLATION
- DANGER
- RISK OF ELECTRIC SHOCK or electrocution
BEFORE WORKING ON THIS DEVICE -
Always cut the supply to the device at the circuit breaker before maintenance. Failure to do this may lead to
death or serious injury to service staff, pool users or others, due to an electric shock.
- DANGER
- SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS PRODUCT IS NOT INSTALLED AND USED CORRECTLY.
- WARNING
- Before installing this product, read and follow the warnings and instructions of this guide. Failing to follow these warnings and
instructions may lead to serious injuries, death or material damage. Refer to www.pentairpooleurope.com for more information linked to this
product.
- WARNING
- Connect the device to a differential interrupter. If this system is used to control the underwater lighting devices, a differential
interrupter must be installed upstream of these devices. Conductors downstream of the differential interrupter shall not occupy conduits, junction
boxes or enclosures containing other conductors, except if the conductors are also protected by a differential interrupter. Refer to valid local codes
for more details.
- WARNING
- This product must be installed by an authorised or certified electrician or a qualified swimming pool professional. All of the applicable
installation codes and local regulations must also be respected. Poor installation will create an electrical hazard which could result in serious injury
or the death of pool users, installers or others due to electric shocks, and may also cause damage to property.
- DANGER
- DISCONNECT THE SUPPLY CONNECTIONS BEFORE WORKING ON THIS DEVICE; ELECTRICAL POWER MAY BE SUPPLIED TO THE RELAY
TERMINALS FROM OTHER SOURCES.
- WARNING – CHEMICAL BURN HAZARD:
Make sure all pumps are switched off at the main circuit breakers at the domestic distribution board before
drilling into any pipes. Set rules for all handling related to electrical aspects, water and chemical products. Group the supply pumps and chemical
product tanks in a safe and secured area.
- WARNING -
Do not use this product to control an automatic swimming pool cover. There is a risk that swimmers could become trapped under the
cover.
- WARNING
– Devices which are not intended for use in single-family dwellings may require additional safety equipment to comply with local
regulations.
- DANGER
– Except for remote controls, install components at a minimum of at least 1.5 m (5 feet) from the inside wall of the pool or spa.
- DANGER
- This product is intended for use in swimming pool applications only.
- ATTENTION
- A sufficient equipotential connection (min. 4.5 mm2 recommended), in accordance with local regulations, is obligatory for all metal
components of the swimming pool, including the pool pump. This is necessary for the electrical safety as well as reduction of the corrosion risk.
IMPORTANT SAFETY GUIDELINES, READ AND FOLLOW ALL OF THE INSTRUCTIONS, KEEP THESE INSTRUCTIONS
02
Summary of Contents for SPEEDEO SB-PF-SPO-003C
Page 31: ......
