VALID
VALID
VALID
!!!!!!!!!!!!!!!!!!!!!
!Put into position !
! ba‘Valid.’!
!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
! 'Valid' to !
! star t washing !
!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
!Put into position !
! R‘ Valid.’!
!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
!Put into position !
!Filtration + Valid!
!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
! Washing in !
! progress 7secs!
!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
! Stop !
! filtration !
!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
! Stop !
! filtration !
!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
! Rinsing in !
! progress 17secs !
!!!!!!!!!!!!!!!!!!!!
Press
VALID
to start the procedure.
SPEEDEO has stopped the filtration pump. This display lasts for 2 seconds.
SPEEDEO has stopped the filtration pump. This display lasts for 2 seconds.
Put the 6-way valve in the 'Rinsing' position and then hold down
VALID
.
Put the 6-way valve in the 'Filtration' position and then hold down
VALID
.
The procedure is finished.
Put the 6-way valve in the 'Rinsing' position and then hold down
VALID
.
SPEEDEO starts the filtration pump for the length of time entered into the
Washing: XX secs
.
SPEEDEO starts the filtration pump for the length of time entered into the
Rinsing field: XX secs
.
SPEEDEO supports you in washing the filter by chronologically proposing the different required
steps.
1 -
On the
Filter washing
sub-menu, enter the filtration length (factory pre-set at 100
hours), which activates the alert requesting filter washing, the desired washing time
length (factory pre-set at 70 secs) and enter the desired filter rinsing time length
(factory pre-set at 20 secs). These time lengths can be personalised by following the
recommendations for your installation.
Welcome menu > Filter Washing:
Filtration menu
> Filter Washing > Manual backwash: VALID
Assisted backwash: Backwash support for the filter on the 6-way valve.
-Manual Backwash
Filtration: 100 hrs
backwash: 70 s
Rinsing: 20 s
24
Summary of Contents for SPEEDEO SB-PF-SPO-003C
Page 31: ......
