Pentair SPEEDEO SB-PF-SPO-003C, Installation And User Manual

Page: 29 / 32

SPEEDEO
®
VA R I A B L E S P E E D P U M P
VALID
ESC
SPEEDEO
®
VA R I A B L E S P E E D P U M P
VALID
ESC
SPEEDEO
®
VA R I A B L E S P E E D P U M P
VALID ESC
1 - Access the secured DAILY HISTORY menu by holding down Esc :
History menu
This menu makes it possible to find the daily and previous day's activity of each connected piece of equipment.
USB
recognised
pH ORP (R
edO
x)
Temp
.
wat
er
Temp
.
air
ESC ESC
4.3
2.1
4.1
5.2
4.4
4.2
01:22 Water:+26.6°C
Filtration : S3
S1:OFF S2:ON S3/OFF
Air:+26.8°C
DAY IN PROGRESS
Filtration: 08h47m06s
Outlet 1 : 05h07m20s
Outlet 2 : 02h34m09s
Outlet 3 : 00h51m43s
DAY-1 HISTORY
Filtration: 15h06m57s Outlet 1 :
07h11m20s
Outlet 2 : 03h16m54s
Outlet 3 : 01h24m05s
Home menu > Update menu :
How to update the internal firmware
5.1 - Disconnect the USB stick (the green indicator lights up)
5.2 - In the main menu at the bottom, under Information, read the
version no.: X.X and check that it has changed.
5.3 - Replace the orange safety cover
5.4: Replace the soft cover.
2.1 - Remove the soft cover, then remove the orange cover
3.1 - Select the update menu
4.1 - Connect the USB cable supplied to the mini USB connector.
4.2 - Connect the USB stick to the end of the USB cable
4.3 - Press on the “up arrow / +” for more than 1 sec.
4.4 - The red and green indicators light up.
4.5 - Wait for the green indicator to remain off for 5 sec.
!! DO NOT TOUCH THE ELECTRICAL CONNECTIONS. RISK OF ELECTROCUTION!
ONLY PROFESSIONALS AUTHORISED TO WORK WITH LIVE INSTALLATIONS MAY
WORK ON THE CONNECTED DEVICE WITHOUT A SAFETY COVER.
1.1 - Unzip the MAJ_Speedeo2.zip file to obtain the Speedeo2.bin file.
1.2 - Copy the Speedeo2.bin file to the main folder of the USB stick
formatted in FAT 16 or FAT 32.
Firmware update
Insert the USB stick and
hold down the
Up key
27