OUT 1
OUT 2
COMM. SPEED 1 SPEED 2 SPEED 3 SPEED 4
BUS
IN 1
IN 2
OUT 3
N
L
230 V ~
3 bar min
VALID
VALID
1 - Connect the cables in accordance with the diagram.
2 - Start the secured
Install menu
(from the main menu, simultaneously hold down
Esc
and
Valid
for 3 secs. A star appears
in the top right corner of the home screen).
3 - On the
Outlets / S1-S2-S3
sub-menu (in accordance with chosen terminal), select
FILTER WASHING
to indicate that a
pneumatic valve is connected to the corresponding outlet
.
4 - On the
Filter Washing > Auto Washing
sub-menu, select
YES
or
NO
so that filter washing runs automatically for the time
length entered in the
Filter Washing / Filtration: 100 hrs
5 - On the
Filter Washing / Filtration: 100 hrs
sub-menu, modify the number of filtration hours (whatever the speed) after
which automatic washing is activated.
6 - On the
Filter Washing > Washing: 70 secs sub-menu
, modify the filtration washing time.
If automatic filter washing is activated, manual washing can still be accessed. If filter washing is started manually, the filtration
time meter which activates automatic backwash is reset to zero.
Outlet: connection for a pneumatic valve (FILTER WASHING)
!!!!!!!!!!!!!!!!!!!!
! 'Valid' to !
! star t washing !
!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
! Washing in !
! progress 7secs!
!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
! Stop !
! filtration !
!!!!!!!!!!!!!!!!!!!!
Press
VALID
to start the procedure.
SPEEDEO has stopped the filtration pump. This display lasts for 2 seconds.
!!!!!!!!!!!!!!!!!!!!
! Stop !
! filtration !
!!!!!!!!!!!!!!!!!!!!
SPEEDEO has stopped the filtration pump. This display only remains for 2 seconds.
SPEEDEO starts the filtration pump activation for the length of time entered into the
Washing field: XX
.
-Manual Backwash
Filtration : 100 hrs
backwash : 70 s
Auto washing: NO
SPEEDEO enables the filter to be cleaned automatically if a pneumatic valve is connected. However,
an operator can force filter washing. Rinsing is not controlled by a pneumatic valve.
1 - Select
manual backwash
then hold down
VALID
. An automatic cycle can be
started for the time lengths entered (factory pre-set at 70 secs) in the
Washing
position
. There is no
Rinsing position
field (not applicable to a pneumatic valve.
Home menu > Filtration menu > Filter Washing:
Automatic filter washing with pneumatic valve
An outlet is a dry contact and does not supply any voltage.
23
Summary of Contents for SPEEDEO SB-PF-SPO-003C
Page 31: ......
