9
Note: Refer to page 3 where (parts index number) is shown
EasyTouch/IntelliTouch Control System Upgrade Kits Installation Guide
Circuit Breaker
Bracket Screws (8-32
x 3/8”)
Circuit Breaker Bracket
Screw (8-32 x 3/8”)
Optional Salt Chlorine
Generator (SCG)
SCG Ground Wire
5. Install the circuit breaker bracket with the circuit breakers onto the enclosure, and secure
it with two #8-32 x 3/8” screws (7).
6. Secure the circuit breaker bracket onto the back of the enclosure with #8-32 x 3/8” screw.
Be sure to reinstall the SCG ground wire (if present). See Figure 7.
Bracket
Screw
Bracket
Screw
Bracket Screw
12
Figure 8. Circuit Breaker Bracket Screws
Figure 7. Circuit Breakers Bracket
