background image

                                                                                                                     

Note: Refer to page 3 where (parts index number) is shown  

 

EasyTouch/IntelliTouch Control System Upgrade Kits Installation Guide

Overview

This manual describes how to upgrade an EasyTouch or IntelliTouch Control System to the IntelliCenter 
Control System.  

The Upgrade Installation Kits apply to the following:

•   EasyTouch

®

 PL4/PSL4 Control Systems, EasyTouch

®

 Control Systems

• IntelliTouch

®

 Control Systems 

Systems using the following Load Center or Power Center use the following kit part numbers:

•   2012 or newer (square low voltage circuit breaker configuration)

•  

P/N 522047 for i10P 

•  

P/N 522048 for i10PS 

•  

P/N 523049 for i10D

•   System must be marked as UL listed/certified

EasyTouch

®

 and IntelliTouch

®

 Control System 

Upgrade Installation Kits

IntelliCenter™ Control System Outdoor Control Panel

Pool

Spa

Features

Lights

Air Temp 65° F

Schedule

Usage

Chemistry

Status

3

3

8:00 A.M.

6.50

0

4

84°

78°

IntelliCenter Control System Outdoor Control Panel for EasyTouch or IntelliTouch Load Center or Power Center

Summary of Contents for EasyTouch





















Reviews: