5
Note: Refer to page 3 where (parts index number) is shown
EasyTouch/IntelliTouch Control System Upgrade Kits Installation Guide
Removing the Existing Outdoor Control Panel
(Continued)
5. Disconnect the transformer connector and if necessary the SCG Board connector (RS-485)
from the existing Outdoor Control Panel circuit board.
6. Disconnect all other connections from the circuit board.
Figure 3. Transformer Connector and SCG Board Connector
7. Remove the two screws securing the outdoor control panel bezel. Remove the outdoor control panel
and bezel from the enclosure. See Figure 2 on page 4.
Transformer
Connector
SCG
Connector
