Arctica 3200xlp switch Installation Guide Chapter 3 Device Installation
2
1. Attach the 2 brackets on the Arctica 3200xlp with screws provided in the accessory
kit.
2. Put the machine on the stock of the rack when installing because the machine is
quite heavy.
3. Put the bracket-mounted switch smoothly into a standard 19’’ rack. Fasten the Arctica
3200xlp to the rack with the screws provided. Leave enough space around the switch
for good air circulation.
Caution!
The brackets are used to fix the switch on the rack. They can’t serve as a bearing.
Please place a rack shelf under the switch. Do not place anything on top of the switch.
Do not block the blowholes on the switch to ensure the proper operation of the switch.
The figure of back horn iron installation is as below:
Figure 3
-
2 The figure of Arctica 3200xlp switch installing on the rack by using the front
and back horn iron
3.2.2.Installing the Power Supply Module
Arctica 3200xlp switch supports 2 power supplies.
