Arctica 3200xlp switch Installation Guide Chapter 3 Device Installation
1
3. Device Installation
3.1.Installation Preparation
3.1.1.Verify the Package Contents
Please unpack the shipping package and verify carefully the contents inside.
3.1.2.Required Tools and Utilities
The required tools and utilities are shown below:
■
Cross
screwdrivers
■
Flat-blade
screwdriver
■
ESD
wrist
strap
■
Antistatic
uniform
Caution!
Users should prepare the required tools and utilities by themselves.
3.2.Device Installation
3.2.1.Installing the Switch
Figure 3
-
1 Arctica 3200xlp switch install sketch map on the rack using stock
Please mount Arctica 3200xlp on the 19’’ rack as below: