Arctica 3200xlp switch Installation Guide Chapter 3 Device Installation
8
Figure 3
-
7 Connect the power supply cable to the Arctica 3200xlp switch
AC Power supply connection procedure is described as below:
1. Insert one end of the power cable provided in the accessory kit into power source
socket, and the other end to the power socket (with overload and leakage protection).
2. Check the power status indicator in the front panel of the switch. The corresponding
PWR indicator should light. Arctica 3200xlp is self-adjustable for the input voltage. As
soon as the input voltage is in the range printed on the switch surface, the switch can
operate correctly.
3. When the switch is powered on, it executes self-test procedure and startups.
Caution!
The input voltage must be within the required range, otherwise the switch can be
damaged or malfunction. Do not open the switch shell without permission. It can cause
physical injury.
Disconnect all power supply cords before servicing.
3.2.8.Earthing Cable Connection
