background image

Arctica 3200xlp switch Installation Guide           Chapter 1 Introduction

 

2

 

split into 4 10Gb SFP+ ports. 

 

Support 40Gb Ethernet 

40Gb Ethernet which adopts full-duplex technology instead of low-speed, half-duplex 

CSMA/CD protocol, is a big leap in the evolution of Ethernet. 40Gb Ethernet can be 

deployed in star or ring topologies. With 40Gb Ethernet, Arctica 3200xlp switch provide 

broad bandwidth and powerful processing capacity. It is suitable for metropolitan 

networks and wide area networks. Using Arctica 3200xlp switch, users can simplify 

network structures and reduce cost of network construction.  

 

Networking Protocols 

Arctica 3200xlp switch supports 802.1d/w/s, 802.1Q, 802.1p, 802.3ad, 802.3x, 

GVRP, DHCP and SNTP etc. The switch also supports comprehensively the multicast 

protocols such as IGMP, DVMRP and PIM. Moreover, Arctica 3200xlp switch supports 

RIPv1/2, OSPF and IPv6. All these protocols supported enable Arctica 3200xlp switch to 

meet the requirements of complex network constructions. 

 

ACL 

Arctica 3200xlp switch supports comprehensively ACL policies. The traffic can be 

classified by source/destination IP addresses, source/destination MAC addresses, IP 

protocols, TCP/UDP, IP precedence, time ranges and ToS. And various policies can be 

conducted to forward the traffic. By implementing ACL policies, users can filter the virus 

packets such as “Worm.Blaster”, “Worm.Sasser” and “Red Code” etc. Arctica 3200xlp 

switch also supports IEEE802.1x port based access authentication, which can be 

deployed with RADIUS, to ensure the port level security and block illegal users.  

 

QoS 

Arctica 3200xlp switch fully supports DiffServ Module. Users can specify a queue 

bandwidth on each port. WRR/SP/SWRR scheduling is also supported. Arctica 3200xlp 

supports the port security. Users can deploy trusted CoS, DSCP, IP precedence and port 

priority. User can also modify packets’ DSCP and COS values. The traffic can be 

classified by port, VLAN, DSCP, IP precedence and ACL table. User can also modify 

packets’ DSCP and IP precedence values. Users can specify different bandwidths for 

voice/data/video to customize different qualities of service.  

 

3D-SMP Ready  

Arctica 3200xlp is up to the mustard of Self-defending security region management 

strategy according to Netware. It is supported interaction with some security system such 

as firewall, IDS, etc. It can defense the virus and aggress effectively from the extranet 

and internet. Thus enhance the security and stability of the network-wide. 

 

Perfect Web Management. 

Arctica 3200xlp supports SNMP, In-band and Out-of band Management, CLI and 

WEB interface and RMON. It can mail the correlative sensitive information to the 

Summary of Contents for Arctica 3200xlp Series


























Reviews: