Pelltech PV1000agri, User Manual

Page: 28 / 51

PV1000agri pellet burner
p
27/ 50
Operation and maintenance
User interface
DK9401A1
www.pelltech.eu
4 Operation and maintenance
4.1 User interface
The burner is controlled via user interface on the front panel. LCD screen (1) displays settings menu,
event log etc. Yellow light (2) shows the presence of flame in burning chamber. Or if blinking, the burner
is out of normal operation. Status can be seen on log screen. Green light (3) indicates if there is fuel in
the burner. Navigation buttons enable to move in menus and make changes in parameters setup.
Burner on/off switch (4) can be used any time to turn on or off the burner. Using this switch, the burner
will make all necessary action to safely stop or start the burning process.
Figure 25 User interface
1 – 4x20 character display
2 – Yellow LED, indicates if flame is detected in burning chamber
3 – Green LED, indicates if pellets are present in internal feeder
4 – Burner on/off switch with power indication light.
5 – Burner operation light, showing if the boiler thermostat sends a signal to the burner.
6 – Fault light
7 - GSM modem antenna