Pelltech PV1000agri, User Manual

Page: 21 / 51

PV1000agri pellet burner
p
20/ 50
Installation
External auger
DK9401A1
www.pelltech.eu
Figure 22 Sprinkler installation
3.4 External auger
The external auger transports pellets from the pellet container to the burner. The burner controls the
work of the auger. The auger is connected to the burner with a special hose (
∅
80), which is made from
easily melting material that acts as a safety measure against back-burning. PV1000Agri pellet burner´s
fuel consumption at full power is about 208-222 kg of pellets per hour ( 3,3-3,7 kg per minute ). External
auger´s productivity must be at least 270kg of pellets per hour. The auger can be fixed to the storage or a
ceiling depending on the conditions at the installation site.
Requirements for auger installation:

The raising angle of the auger must not exceed 45°

The end of the exit tube of the auger and the input of the burner must not be aligned. The
recommended minimal horizontal distance is 20cm.