Pelltech PV1000a, User Manual

Page: 8 / 59

PV700a / PV1000a pellet burners
p
8/ 59
DK9401B1 www.pelltech.eu
1 General description
PV700a and PV1000a are burners of wooden pellets (sawdust granules) that are intended to use in
different boiler houses. Only wooden pellets with 6 or 8mm diameter can be used to run burners. You
cannot use any other form of fuel but pellets to run the burner. Unique design of burners’ burning
chambers allows to burn also industrial pellets. The construction of the burners allows them to be used
with different boilers: liquid fuel, solid fuel and universal boilers. The burner is connected to the boiler
by using a connection plate.
The burner is equipped with a safety thermostat, a melting hose, temperature sensor, sprinkler system
with pressure switch and auxiliary battery for protection against back-burning. Main technical data are
given in Table 1 and Figure 1
.
Parameter Unit PV700a PV1000a
L
total length
mm 1190 1306
L1
housing length
mm 592 624
L2
burning chamber length
mm 590 682
⌀ D1
feeder auger’s tube diameter
mm 80 80
Pellet inlet tube diameter mm 76 76
H
total height
mm 598 621
H1
burning chamber height
mm 451 545
W
burner housing width
mm 606 706
W1
burning chamber width
mm 528 614
Required chimney diameter mm 300 350
Mass net/bruto kg 150/185 230/280
Max amount of flue gases M
3
/h 1800 2500
Max fuel consumption kg/h 150 213
Maximum/nominal power kW 700 1000
Minimum power kW 200 250
Hold flame power kW 40 60
Noise level dB 58 58
Emission class EN 15279 - 5 5
Operating temperature C
o
-10…40 -10…40
Supply voltage VAC 3x380 3x380
El power at ignition W 1100 2100
El power, average W 370 480
El power at standby W 20 20
Main components of the burner and their locations are depicted in Figure 2 and described in Table 2 .
Table 1 Technical data of burner