PV700a / PV1000a pellet burners
p
22/ 59
DK9401B1 www.pelltech.eu
Install the 2 lower position grates .
Install the 8 middle position grates
with 5mm holes .
Install the 8 higher position grates
with 7mm holes.
Install the ceramic seal on the back
wall of the burning chamber.
Install the back wall stones on the
burning chambers back wall.
Caution!
Be careful not to damage
the temperature sensor!
Push the stone temperature sensor
into the opening in the back wall
stone.
Figure 21
Figure 22
