PV700a / PV1000a pellet burners
p
21/ 59
DK9401B1 www.pelltech.eu
Connect the linear motor with the
moving grate holder. Use 27x2,5mm
pipe (length 240mm), M8x45mm bolt
for the burning chamber side and a
M6x25 socket set screw (DIN914 45H)
on the linear motor side.
Push the stone temperature sensor
through the hole in the burner body
and the pipe on the burning
chambers back wall, isolate it from
the air flow (accessible from the
burning chamber side) with ceramic
sealing to prevent cold air from
tampering with the measurements.
Figure 20
Figure 19
