PV700a / PV1000a pellet burners
p
20/ 59
DK9401B1 www.pelltech.eu
Install the ceramic sealing strips on
the boiler door. Fix them temporarily
in position with any ordinary
cellophane tape (scotch).
Cut away the excessive sealing on the
perimeter of the air chamber.
Mount the burner’s housing on the
boiler door, using 4 M12x70mm bolts
and respective washers.
Push the igniter tubes through the
burning chambers back wall and fix
them in position with M4 screws.
Figure 18
Figure 17
Figure 16