Peak Scientific Solaris XE, User Manual

Page: 10 / 24

Page 10
Fittings Kit Contents
Supplied in the Fittings Kit are all the fittings required to connect the generator to the
application. The contents of the Fittings Kit are as follows:
1. 6mm Teflon Tubing x 3m
2. ¼ ” - 6mm Push-Fit Elbow Fitting x 2
3. UK Mains Power Cable x 1
4. EU Mains Power Cable x 1
5. US Mains Power Cable 110v x 1
6. US Mains Power Cable 230v x 1
7. JP Mains Power Cable 100v x 1
8. 2.5mm Hex Key x 1
9. 3mm Hex Key x 1
10. No.8 Wall Plug x 4
11. No.8 Screw x 4
All of the generators output ports are located on the rear panel of the unit.
Unpacking Instructions
The unit weight constitutes a two person lift and as such, safe lifting practices should
be employed; do not attempt to lift on your own, as you will significantly increase the
chance of injury & damage to yourself and others around you.
1. Remove the generator from the packaging.
2. Next, with someone on either side of the unit, position your hands underneath the
unit ready to lift.
3. Ensuring your knees are bent and your back is straight, lift the unit to the desired
location.