Page 17
Setting the Output Pressure
The generator will deliver Nitrogen at the rated flow up to a maximum pressure of
116psi, assuming an adequate air supply. The output pressure can be adjusted using the
regulator at the front of the generator and viewed on the adjacent gauge.
To access the regulator, unclip the fascia from the unit.
Adjust the gauge to the required pressure. To ensure a smooth pressure profile, it is not
recommended to increase the output pressure to above the factory set 116psi.
If earth cable is removed from front fascia, ENSURE it is attached
before using the generator .
WARNING
Summary of Contents for Solaris XE
Page 23: ...Page 23...
